美國戴安 P/N: 088234Dionex CarboPac SA10-4µm Carbohydrate Column

點擊看大圖

如果您對該產品感興趣的話,可以

產品名稱: 美國戴安 P/N: 088234Dionex CarboPac SA10-4µm Carbohydrate Column

產品型號:

產品展商: 其它品牌

產品文檔: 無相關文檔

簡單介紹

【簡單介紹】戴安公司生產的儀器主要有離子色譜儀、高效液相色譜儀、快速溶劑萃取儀和氨基酸直接分析儀。其中離子色譜儀憑借著雄厚的技術優勢和方法已廣泛地應用于各個領域，其市場占有率達80%。全球與離子色譜相關的文章有90%均出自戴安公司生產的離子色譜儀。　　
戴安公司的快速溶劑萃取儀15分鐘之內僅用15毫升溶劑既可完成對10g樣品的萃取，該技術已在環境、**、食品和聚合

美國戴安 P/N: 088234Dionex CarboPac SA10-4µm Carbohydrate Column 的詳細介紹

Dionex CarboPac SA10-4?m Column?

for Fast, High-Resolution Mono- and Disaccharide Analysis

The New Thermo Scientific^??Dionex^??CarboPac^??SA10-4?m Column is designed for fast chromatographic analysis of simple sugars in Biofuel and Food samples. The peak efficiencies produced by the Dionex CarboPac SA10-4?m columns produce 60 – 80% higher peak efficiencies than standard Dionex CarboPac SA10 columns, thus producing better resolution and easier peak identification and integration. The Dionex CarboPac SA10-4?m column can analyze six common sugars in Food samples in only 10 min, or eight common Biofuel mono- and disaccharides in less than 8 min.

This is the first in a series of Dionex CarboPac columns that use smaller resin particles. The smaller particles produce more efficient peaks and better resolution making analysis easier and more reliable. ?The smaller particles also produce higher system back pressure (over 3000 psi) under standard operating conditions and therefore can only be run using Thermo Scientific^??Dionex^??HPIC^??systems such as the Thermo Scientific Dionex ICS-5000⁺?HPIC system, which can operate up to 5000 psi.

The Dionex CarboPac SA10-4?m column should be used as a direct replacement for the Dionex CarboPac SA10 column only if an HPIC system is available

The polymeric Dionex CarboPac SA10-4?m column is packed with 4 ?m supermacroporous substrate, coated with the same strong anion-exchange layer of latex nano beads as the Dionex CarboPac SA10 column, which provides high capacity and rapid, high-resolution separations. The Dionex CarboPac SA10-4?m columns feature high reproducibility, and can withstand thousands of injection cycles under high pH conditions.

Thermo Scientific^??Dionex^??CarboPac^??SA10-4?m Column for Monosaccharide and Disaccharide Analysis?Specifications
Dimensions	Dionex CarboPac SA10-4?m Analytical Column: 4?×?250 mm and 2 × 250 mm Dionex CarboPac SA10-4?m Guard Column: 4 × 50 mm and 2 × 50 mm
Maximum operating pressure	5,000 psi (34.5 MPa)
Temperature range	4–60 °C
Typical operating conditions	4,000 psi at 1.5 mL/min (standard-bore column) or 0.38 mL/min (microbore column) Recommended flow rate: 1.5 mL/min (standard-bore) or 0.38 mL/min (microbore)
Typical Eluents	?Potassium hydroxide via Eluent Generation
Resin composition	4-?m diameter sumpermacroporous substrate (ethylvinylbenzene 55% crosslinked with divinylbenzene) agglomerated with 55-nm MicroBead difunctional quaternary ammonium ion (4.5% cross-linked).
Anion-exchange capacity	Approximately 290 ?eq/column (4?×?250 mm standard-bore column) Approximately 73 ?eq/column (2 × 250 mm microbore column)
Column construction	PEEK