美國戴安Dionex CarboPac PA200 Carbohydrate Column 062895 生物色譜柱

點擊看大圖

如果您對該產品感興趣的話,可以

產品名稱: 美國戴安Dionex CarboPac PA200 Carbohydrate Column 062895 生物色譜柱

產品型號: 062895

產品展商: 戴安Dionex

產品文檔: 無相關文檔

簡單介紹

戴安公司生產的儀器主要有離子色譜儀、高效液相色譜儀、快速溶劑萃取儀和氨基酸直接分析儀。其中離子色譜儀憑借著雄厚的技術優勢和方法已廣泛地應用于各個領域，其市場占有率達80%。全球與離子色譜相關的文章有90%均出自戴安公司生產的離子色譜儀。　　戴安公司的快速溶劑萃取儀15分鐘之內僅用15毫升溶劑既可完成對10g樣品的萃取，該技術已在環境、**、食品和聚合物工業等領域得到廣泛應用。

美國戴安Dionex CarboPac PA200 Carbohydrate Column 062895 生物色譜柱 的詳細介紹

Fast, pH-Stable Separation of Oligosaccharides

A variety of HPLC approaches are proposed for characterizing oligosaccharides, but many prove inadequate for separating complex mixtures and are limited by a lack of specificity and high limits of detection. Dionex has developed an improved HPLC technique for carbohydrate analysis based on anion-exchange chromatography coupled with pulsed amperometric detection. This technique provides high-resolution separations with sensitive and specific detection, without derivatization.

Sensitive, direct detection with no derivatization, using pulsed amperometric detection
Very high-efficiency separations
Separations based on size, charge, degree of branching, and linkage isomerism
Low flow rate saves on eluent consumption
Does not require derivatization

CarboPac^? PA200 columns are packed with a hydrophobic, polymeric, pellicular anion-exchange resin stable over the range of pH 0–14. The unique pH-stability of the packing material allows the use of eluent compositions that are conducive to anodic oxidation of carbohydrates at gold electrodes.

CarboPac PA200 Column for High-Resolution Oligosaccharide Separations Specifications
Dimensions	CarboPac^? PA200 Analytical Column: 3 × 250 mm CarboPac PA200 Guard Column: 3 × 50 mm
Maximum operating pressure	4000 psi (27.9 MPa)
Temperature range	6–60 °C Recommended operating temperature: controlled ambient
Typical operating conditions	2700 psi at 0.5 mL/min (analytical and guard columns) Recommended flow rate: 0.5 mL/min
Mobile phase compatibility	pH 0–14; 100% compatible with common organic solvents. Ionic form eluents: sodium acetate and sodium hydroxide only.
Resin composition	5.5 μm-diameter ethylvinylbenzene/divinylbenzene substrate (55% cross-linked) agglomerated with 43 nm MicroBead^? quaternary amine functionalized latex (6% crosslinked)
Anion-exchange capacity	Approximately 35 μeq/column (3 × 250 mm analytical column)
Column construction	PEEK^? with 10-32 threaded ferrule-style end fittings. All components are nonmetallic